Welcome to the Straightbourbon.com Forums.
Results 1 to 8 of 8
  1. #1
    Enthusiast
    Join Date
    Feb 2006
    Location
    Eastern MA
    Posts
    406

    Fermenting - weird top layer appearance at WT

    When I was at Wild Turkey last week I noticed that after several days of fermenting the top layer on the tanks was VERY thick and lumpy. I asked Jimmy Russell about this and mentioned that I had never seen the fermentaion so lumpy and thick at the top before at any other distillery. There is usually a layer at the top, but this was many times thicker and lumpier than I had ever seen. He said is was due to their mashbill. I asked if he meant the high rye content and he replied yes.

    The next day I was at Four Roses and was expecting to perhaps see something similar due to their high rye usage, but their fermentations all looked pretty normal. (Unless all the tanks were fermenting the low rye mashbill that day.)

    Has anyone else noticed this and have a further explanation? Chuck?

    Thanks,
    Mike

    "You're the best bourbon drinkers ever!" - Margo (waitress at Bourbon's Bistro in Louisville)

  2. #2
    Advanced Taster
    Join Date
    Mar 2009
    Location
    Mt. Washington, KY
    Posts
    150

    Re: Fermenting - weird top layer appearance at WT

    Mike,

    The thickness of the grain cap on top of the fermenters is a function of a number of things:

    1. What stage of fermentation is in progress. When the fermenter is first filled, the grain is evenly distributed, and the fermenter has no grain cap. There may even be a layer of frothy foam on top of the fermenter. As the fermentation proceeds, the carbon dioxide released by the yeast during fermentation begins to buble to the surface ... carrying the sticky grain residue with it. A grain cap begins to form, and gets progressively thicker as the fermentation progresses ... sometimes reaching a thickness of 4 to 6 inches. At first, as the grain cap forms, it will appear rather smooth and uniform, but as it continues to expand, it will crack and heave ... resulting in a jagged and uneven surface. As the process begins to wind down, the level of carbon dioxide bubbles begins to decrease ... and the weight of the grain cap will cause it to sink ... lessening, or almost completely diminishing the appearance of the grain cap. Right before pump out, the fermenter is stirred to disperse the spent grain more uniformly ...

    So the appearance of the grain cap will depend on when you look at it.

    2. The thickness of the grain cap is also dependant on the performance of the mill ... either through wearing out, or falling out of adjustment, or by choice of the distiller... The more coarse the grist, the thicker the cap will get ... at Maker's Mark, right before they replace or sharpen the mill rolls, the grain cap is very thick ... right after, it is much less thick.

    3. As Jimmy Russell told you, the thickness of the cap will also depend upon the mash bill. this can be a fairly complex relationship ... However, the rye residue does tend to be "stickier" and clings better to the bubles as they rise ... so the cap gets thicker.

    4. There are probably other factors that help determine the ultimate grain cap thickness and appearance ... like atmospheric conditions (high or low pressure ... humidity levels ... etc). It has been a long time since I did any Chemical Engineering math on the topic called "buble fractionation" ... but that is basically what's going on here.

    Hope all this helps.
    Dave

    "Remember, the BEST bourbon is FREE bourbon ..."

  3. #3
    Bourbonian of the Year 2010 and Guru
    Join Date
    Aug 2005
    Location
    Kentucky!
    Posts
    4,749

    Re: Fermenting - weird top layer appearance at WT

    I've always wanted to time a distillery tour to coincide with the fermenting and distilling of the rye, but have so far been unsuccessful in this endeavor.
    2010 Bourbonian of the Year

    As long as you have good whiskey you're not "unemployed", you're "Funemployed!!!"

    I'm no Pappyophile

  4. #4
    Advanced Taster
    Join Date
    Mar 2009
    Location
    Mt. Washington, KY
    Posts
    150

    Re: Fermenting - weird top layer appearance at WT

    Barturtle,

    I think it might also be instructive to take the same tour on 4 consecutive days ... making note of a specific fermenter or two and watching their progress throughout the fermentation process.
    Dave

    "Remember, the BEST bourbon is FREE bourbon ..."

  5. #5
    Bourbonian of the Year 2010 and Guru
    Join Date
    Aug 2005
    Location
    Kentucky!
    Posts
    4,749

    Re: Fermenting - weird top layer appearance at WT

    I've always thought it would be a good idea for the distilleries to put a sign on the fermenters telling the fill date of each fermenter, so the tourists could easily see that one was on day one, day two, day three, etc.
    2010 Bourbonian of the Year

    As long as you have good whiskey you're not "unemployed", you're "Funemployed!!!"

    I'm no Pappyophile

  6. #6
    Enthusiast
    Join Date
    Feb 2006
    Location
    Eastern MA
    Posts
    406

    Re: Fermenting - weird top layer appearance at WT

    Dave,

    Thanks for the detailed response. That may be it, that I caught the fermentation right at the stage where the grain cap was at its most pronounced and before it sank back down. Some of the tours I've been on have shown us fermenters are various stages and none looked this dramatic to me, but perhaps the stage where the cap cracks and makes its thickness obvious is brief enough that a visitor would not catch it very often.

    I'll try to post a few comparison pictures as I get to them.
    Mike

    "You're the best bourbon drinkers ever!" - Margo (waitress at Bourbon's Bistro in Louisville)

  7. #7
    Bourbonian Of The Year 2013 and Guru
    Join Date
    Sep 2004
    Location
    Just East of the Big Chicken, GA
    Posts
    5,596

    Re: Fermenting - weird top layer appearance at WT

    Quote Originally Posted by barturtle View Post
    I've always thought it would be a good idea for the distilleries to put a sign on the fermenters telling the fill date of each fermenter, so the tourists could easily see that one was on day one, day two, day three, etc.
    Jimmy and I toured Maker's last week, and the guide pointed out the "approximate" age of what was in each. Didn't break it down by day, but simply said "Tank X is new, Tank Y is in the middle of the process, Tank Z is almost done." The tank I dipped my finger into was very globby, thick, and not producing very many bubbles. The guide said it was one near the end of the cycle.
    JOE

    Wag more.
    Bark less.

    "Every bottle is its own learning experience." -- Sensei Ox-sama

  8. #8
    Advanced Taster
    Join Date
    Mar 2009
    Location
    Mt. Washington, KY
    Posts
    150

    Re: Fermenting - weird top layer appearance at WT

    If it was globby and thick ... it couldn't have been too near done ... if you tasted it, you would have a better idea of completeness. Near the end, it is very sour and a hint of alcohol is present.
    Dave

    "Remember, the BEST bourbon is FREE bourbon ..."

 

 

Similar Threads

  1. Weird St. Patrick's Day Drinks
    By cowdery in forum Cocktails
    Replies: 5
    Last Post: 03-15-2009, 22:51
  2. Your Top Five
    By HipFlask in forum General Bourbon Discussion
    Replies: 89
    Last Post: 04-14-2008, 14:16
  3. YOUR top 5..
    By mred in forum General Bourbon Discussion
    Replies: 50
    Last Post: 11-21-2006, 19:00
  4. Top Five Under $20.00
    By jkiiha in forum General Bourbon Discussion
    Replies: 11
    Last Post: 04-08-2002, 17:42

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to top