Res/st-or Posted February 14, 2010 Share Posted February 14, 2010 Anyone know a good trick to remove a cork that has broken off and fallen into the bottle? If I leave it in the bottle, will I get the dreaded cork taint? Link to comment Share on other sites More sharing options...
p_elliott Posted February 14, 2010 Share Posted February 14, 2010 Strain the bourbon through a coffee filter, rinse the bottle out, pour the bourbon back into the bottle and replace the the cork with a new one. Link to comment Share on other sites More sharing options...
silverfish Posted February 14, 2010 Share Posted February 14, 2010 Is the cork piece small enough to get caught in the coffee filter or so large that it won't fit through the opening? Link to comment Share on other sites More sharing options...
Special Reserve Posted February 14, 2010 Share Posted February 14, 2010 To remove a broken cork from the bottle. This works I've done this several times. Link to comment Share on other sites More sharing options...
silverfish Posted February 14, 2010 Share Posted February 14, 2010 Get out! That make me wanna push a cork in just to try it.Thanks for the link. Link to comment Share on other sites More sharing options...
sailor22 Posted February 14, 2010 Share Posted February 14, 2010 Cool vid - thanks for the link. As cool as it is that technique isn't much help in most of the broken cork problems I encounter. If the pieces are relatively large use one of those gold very fine screen coffee filters and pour the Bourbon through allowing the filter to catch the pieces if cork. If it is a lot of very small almost powder like pieces, like when the cork of an old ceramic decanter disintegrates, use a conical unbleached paper coffee filter. I haven't noticed either technique effecting the taste of the juice. Link to comment Share on other sites More sharing options...
Res/st-or Posted February 14, 2010 Author Share Posted February 14, 2010 That trick worked perfectly. Awesome... :cool: It was a bottle of Knappogue single malt irish whiskey. It was nearly the whole cork sheared off in one piece. Try it... It really works!!! Thankfully, that has never happened to any of my bourbons. Link to comment Share on other sites More sharing options...
Special Reserve Posted February 14, 2010 Share Posted February 14, 2010 At first I was skeptical but I set up an experiment using an empty wine bottle. It work well. I've had to use it twice on bourbon bottles. Link to comment Share on other sites More sharing options...
IronHead Posted February 14, 2010 Share Posted February 14, 2010 You can also use a piece of thick twine with a knot tied in one end to push the cork out as you pull the twine or a wire coat hanger with a small 'J' bent into one end. Never seen the plastic bag method...that was pretty cool. Link to comment Share on other sites More sharing options...
nblair Posted February 14, 2010 Share Posted February 14, 2010 If it is a lot of very small almost powder like pieces, like when the cork of an old ceramic decanter disintegrates, use a conical unbleached paper coffee filter. I haven't noticed either technique effecting the taste of the juice. Link to comment Share on other sites More sharing options...
tommyboy38 Posted February 14, 2010 Share Posted February 14, 2010 I wonder if the bag method on youtube will result in the dreaded "bag taint"? Link to comment Share on other sites More sharing options...
Res/st-or Posted February 14, 2010 Author Share Posted February 14, 2010 The way my mind works, I'm surprised I didn't make the connection with bag taint..... Good one!! Link to comment Share on other sites More sharing options...
unclebunk Posted February 14, 2010 Share Posted February 14, 2010 To remove a broken cork from the bottle. This works I've done this several times. Awesome! I'm going to make lots of money on bar bets in the next few weeks! Link to comment Share on other sites More sharing options...
fishnbowljoe Posted February 14, 2010 Share Posted February 14, 2010 I always keep a couple of empty bottles on hand just in case this happens and I can't get a cork out. I also save my corks. Never hurts to be prepared. I've actually had to decant bourbon into different bottles twice. JoeFWIW, my favorites to use as backups are empty ETL/Weller Centennial bottles. They fit anywhere in a bunker, or on a shelf. :grin: Link to comment Share on other sites More sharing options...
Stu Posted February 15, 2010 Share Posted February 15, 2010 To remove a broken cork from the bottle. This works I've done this several times. Thank you SO much! Great idea and it looks easy. As was said earlier I'm tempted to drive a cork into a bottle just to try it. Link to comment Share on other sites More sharing options...
Recommended Posts