rjg1701 Posted January 7, 2018 Share Posted January 7, 2018 Recently picked up a bottle of the JB Distillers Cut, and as I was looking at it noticed what looked like a chunk of pumice in the glass. Had noticed something similar in a bottle of ECBP a couple of weeks ago. Is this fairly common or something to worry about? 1 Link to comment Share on other sites More sharing options...
flahute Posted January 7, 2018 Share Posted January 7, 2018 Sounds like flock. Chill filtration removes this and both of the whiskies you mention are not chill filtered. It's nothing to worry about. 1 Link to comment Share on other sites More sharing options...
NDN98 Posted January 8, 2018 Share Posted January 8, 2018 12 hours ago, flahute said: Sounds like flock. Chill filtration removes this and both of the whiskies you mention are not chill filtered. It's nothing to worry about. This 1 Link to comment Share on other sites More sharing options...
rjg1701 Posted January 8, 2018 Author Share Posted January 8, 2018 This seems unlikely as it is clearly embedded in the glass, to the point that you can see light distortion around the objects. I will try to get some pictures this evening. 1 Link to comment Share on other sites More sharing options...
CardsandBourbon Posted January 8, 2018 Share Posted January 8, 2018 What the flock is going on here? Sounds like the quality control inspector for the bottle manufacturer was imbibing that day. 2 Link to comment Share on other sites More sharing options...
0895 Posted January 8, 2018 Share Posted January 8, 2018 Am I the only one here who inspects several bottles before buying, to make sure I get nice undamaged labels, good wax, good fill level, nice looking glass, etc? OCD is a hard life sometimes 4 Link to comment Share on other sites More sharing options...
CardsandBourbon Posted January 8, 2018 Share Posted January 8, 2018 He 1 hour ago, 0895 said: Am I the only one here who inspects several bottles before buying, to make sure I get nice undamaged labels, good wax, good fill level, nice looking glass, etc? OCD is a hard life sometimes Heck, I take a laser level in the store and line up the bottles and get the one that has 0.0000031536 mls. more in it. I also only drink from the bottles when the relative humidity is below 41.389573% so as not to have any of that precious juice disappear into the atmosphere. Link to comment Share on other sites More sharing options...
Harry in WashDC Posted January 8, 2018 Share Posted January 8, 2018 1 hour ago, 0895 said: Am I the only one here who inspects several bottles before buying, to make sure I get nice undamaged labels, good wax, good fill level, nice looking glass, etc? OCD is a hard life sometimes Think of all the "defective" bottles you are leaving for me. More than once, I've taken one such to the cash/card register and said, "I'll buy this bad one if you give me a discount." Hard to keep a straight face, but . . . And, no, I've never gotten a discount. Link to comment Share on other sites More sharing options...
GeeTen Posted January 8, 2018 Share Posted January 8, 2018 2 hours ago, Harry in WashDC said: Think of all the "defective" bottles you are leaving for me. More than once, I've taken one such to the cash/card register and said, "I'll buy this bad one if you give me a discount." Hard to keep a straight face, but . . . And, no, I've never gotten a discount. I have! 2 Link to comment Share on other sites More sharing options...
fishnbowljoe Posted January 8, 2018 Share Posted January 8, 2018 The only defect I've ever found in a bottle is that it just didn't last long enough. Biba! Joe 2 Link to comment Share on other sites More sharing options...
Harry in WashDC Posted January 8, 2018 Share Posted January 8, 2018 2 hours ago, GeeTen said: I have! Guess I have to keep asking. 1 Link to comment Share on other sites More sharing options...
rjg1701 Posted February 1, 2018 Author Share Posted February 1, 2018 The camera doesn't do a good job of capturing the light distortion, but as stated earlier these objects are clearly inside the glass. 1 Link to comment Share on other sites More sharing options...
smokinjoe Posted February 2, 2018 Share Posted February 2, 2018 I would have expected them to go away by now...Try some 3-in-1 oil and some gauze pads to fix her up. 1 Link to comment Share on other sites More sharing options...
rjg1701 Posted February 2, 2018 Author Share Posted February 2, 2018 Its not the appearance that bothers me, more worried about whatever it is leaching into the whiskey. 1 Link to comment Share on other sites More sharing options...
Richnimrod Posted February 2, 2018 Share Posted February 2, 2018 13 hours ago, rjg1701 said: Its not the appearance that bothers me, more worried about whatever it is leaching into the whiskey. I can't imagine that this will be an actual thing. ...But, if you're really worried about it, I'd be happy to send you a check to cover the cost of packing and shipping any of 'em to me for proper evaluation and subsequent disposal. 1 Link to comment Share on other sites More sharing options...
Dannabis Posted April 30, 2018 Share Posted April 30, 2018 On 1/8/2018 at 9:32 AM, CardsandBourbon said: What the flock is going on here? Sounds like the quality control inspector for the bottle manufacturer was imbibing that day. makes sense. If I had a tipple or two, I would probably get emotional and be telling that defective bottle that just because it's different, doesn't mean it's not special! Link to comment Share on other sites More sharing options...
Dannabis Posted April 30, 2018 Share Posted April 30, 2018 On 2/1/2018 at 6:17 PM, rjg1701 said: Its not the appearance that bothers me, more worried about whatever it is leaching into the whiskey. Glass is generally non porous, so anything encased in glass will not be able to leach out. Link to comment Share on other sites More sharing options...
Recommended Posts