DeanSheen Posted October 9, 2009 Share Posted October 9, 2009 Anyone have experience with closed cell foam?I'd like to diy one of these.http://www.winecruzer.com/8pack-winecarrierwheel.htmlThe base product is this:http://www.pelican.com/cases_detail.php?Case=1440Any ideas? I've seen people talk about inserting styrofoam shippers inside of the case but a more professional approach would be nice. Link to comment Share on other sites More sharing options...
MarkEdwards Posted October 9, 2009 Share Posted October 9, 2009 Anyone have experience with closed cell foam?I'd like to diy one of these.http://www.winecruzer.com/8pack-winecarrierwheel.htmlNice! If you start one, make the wheels retractable so it can be store in the trunk without rolling around.Me, I just make do with a compartmented carry bag from Goody Goody's . Link to comment Share on other sites More sharing options...
DeanSheen Posted October 10, 2009 Author Share Posted October 10, 2009 Well you can get the base carrier online shipped for $107 right now.That full blown version was like $345 shipped. Thats allot of room to play with. I did make contact some months ago with a custom foam place, I'll have to see if I can dig that up. On the other hand what I should do is see if I can get a local supplier to sell me a brick of it then cut and glue it to taste.I'm just not sure how you cut that sort of material. Link to comment Share on other sites More sharing options...
ACDetroit Posted October 10, 2009 Share Posted October 10, 2009 You may want to check into a 4 lbs. cross link foam, it's smooth and very durable. You could go 6 lbs. but if I remember correctly it's not a on the shelf stock item (special order) which means cost would be steep. I have some access to companies with water jet cutting machines so it may be possible to have a template made up and then glue them together to fill the box.Cool idea for sure.Tony Link to comment Share on other sites More sharing options...
fishnbowljoe Posted October 10, 2009 Share Posted October 10, 2009 From time to time I'm able to get some foam from work. It's used as packing material for some of the more delicate truck parts we get in. Gauges, lights, switches, etc... I have used it before as packing material when I ship bottles. Works great. I'll keep my eyes open and see if I can snag some more. Joe Link to comment Share on other sites More sharing options...
sailor22 Posted October 11, 2009 Share Posted October 11, 2009 I have had lots of experience with Pelican products - they are great. You won't ever wear it out and it's bomb proof.As for foam, Pelican makes "pick and pluck" for a lot it's models. It's a large chunk of foam cut to fit the box and then perfed so it can be removed in 1/4 inch pieces. The idea is to form fit the foam around photo or electronic pieces and should be easy to make a sequence of round holes for bottles. If you get a denser block from some packing source the preferred way to cut it is with one of those old style electric carving knives (check second hand stores) that have a reciprocating blade. Take your time and you can make the cut look pretty good.You should end up with a very cool case. Link to comment Share on other sites More sharing options...
sgtgto Posted October 26, 2009 Share Posted October 26, 2009 The storm cases, IMO, are better than the Pelican. I used to carry pelican for my tool box, but switched to the storm and never looked back. The storm case has a full length hinge on most cases, a stiffer handle, and a latch system that will not open unless you depress the button on the latch. And for foam, do not discount the foam noodles for pools. They are dense enough to support a bottle, but soft enough to cushion. And 4 pieces of them in a square makes a great nest for a bottle Did I mention they were cheap? Link to comment Share on other sites More sharing options...
DeanSheen Posted October 27, 2009 Author Share Posted October 27, 2009 Thanks for the tip, the Storm Cases don't have the same dimensions, but the pool noodle idea sounds like an excellent suggestion.Pelican1440 Top Loader Case Interior Dimensions: 17.10" x 7.50" x 16.00" (43.4 x 19 x 40.6 cm)http://www.stormcase.com/StormCaseFit.asp Link to comment Share on other sites More sharing options...
sailor22 Posted October 27, 2009 Share Posted October 27, 2009 I have been hauling my photo gear in Pelican for seems like forever - but that storm looks like the shiznit. The noodle idea is great - might be the best way to ship bottles too. Link to comment Share on other sites More sharing options...
Recommended Posts